11 · Lawn & Garden

Metal Detector

Also called Detector · Pipe locator

An electronic detector that finds metal objects buried in the ground or hidden inside other materials.

Battery / electric
View in the rental catalogue ↗Compare →

Overview

A metal detector pushes a magnetic field into the ground and listens for what metal sends back, so it finds objects buried in soil or hidden inside a wall or slab.

On site the main use is checking before you dig or core — finding pipes, cables and rebar before a bit reaches them. Off site it is lost keys and jewellery, archaeology and recreational detecting, and security screening.

Sweep the coil slowly, low and level just above the ground, overlapping each pass. Swinging it fast and high is the usual reason someone finds nothing.

If the model has ground balance, use it. Mineralised soil throws false signals that will have you digging holes for nothing.

Catalogue specifications

  • NOTE IT IS NOT WATER PROOF *********
  • Target ID Cursor Segments 12
  • Iron Discrimination Segments 2
  • Accept/Reject Discrimination YES
  • Search Modes 5 (plus Pinpoint)
  • Sensitivity/Depth Adjustments 8
  • Electronic Pinpointing YES
  • Frequency 6.5 kHz
  • Audio Tone ID Levels 3
  • Standard Searchcoil 6.5" x 9" PROformance
  • Length (Adjustable) 42" to 51" (1.06m - 1.29m)
  • Total Weight 2.7 lbs. (1.2 kgs.)
  • Batteries 4 AA (included)
  • Warranty 2 Year, Limited Parts/Labor
  • Electronic Pinpointing: to precisely locate target and speed recovery
  • Accept/Reject Discrimination: to modify discrimination patterns
  • Five Search Modes: select pre-set discrimination pattern or create your own
  • Continuous Coin Depth Indicator: to determine target depth
  • Battery Condition Indicator: shows battery life continually
  • Interchangeable ACE series searchcoils: are available
  • Expanded Target ID Legend: easy-to-read above large LCD screen
  • Pushbutton Controls: with One-Touch operation

Best uses

  • Locating metal pipes, cables and rebar before digging
  • Finding lost items such as keys and jewellery
  • Archaeology and recreational detecting
  • Security screening

Troubleshooting

Constant beeping or false signals

Checks to try, in order

  1. Move away from power lines, fences, phones and radios.
  2. Lower the sensitivity.
  3. Run the ground-balance routine, if the model has one.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
No response at all

Checks to try, in order

  1. Fit fresh batteries.
  2. Check the coil cable is plugged in and the connector is tight.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
No power or cuts out quicklyShared · Battery / electric

Likely causes

  • Battery not charged
  • Emergency stop pressed
  • Disconnect switch off

Checks to try, in order

  1. Charge fully before use and check the charge indicator.
  2. Check any battery disconnect or emergency stop switch.
  3. Make sure the charger was plugged into a live outlet overnight.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?

Safety

  • A metal detector won't find plastic pipes or every utility — still get utility locates before you dig.

For battery / electric

  • Charge in a ventilated area away from flammable materials.
  • Keep emergency stops unobstructed and test them before use.

Videos & links

Related equipment

All Lawn & Garden →

Always follow the manufacturer’s manual and site safety rules. Favourites and viewing history are stored on this device.