13 · Floor Care

Spotter Vacuum Extractor

Also called Spotter · Spot cleaner · Portable extractor

A compact, portable extractor for targeting stains and high-traffic spots without cleaning the whole carpet.

Electric (corded)
View in the rental catalogue ↗Compare →

Overview

A spotter is a small portable extractor for one stain or one worn patch rather than a whole floor. Same principle as the big machine, solution in and soil straight back out, in something that can be carried to the mark.

Coffee, food and pet stains, hallways and entrances that wear faster than the rest of the room, upholstery, stairs and car interiors, and quick clean-ups between deep cleans.

Blot a fresh spill before extracting it. Anything still sitting on the surface should come up on a cloth, not be driven down into the pile.

Rinse with plain water and finish with a dry pass, or the cleaned spot dries with a ring around it where the solution spread.

Catalogue specifications

  • IDEAL FOR SOFAS, DRAPES, MATTRESS AND CAR SEATS.
  • GET THE WAND AS AN ADD- ON AND USE TO CLEAN CARPET
  • NOTE IT DOES NOT HEAT THE WATER, BUT HOT WATER CAN BE UTILIZED IN THE UNIT
  • MODELS AVAILABLE;
  • MOD PS35E
  • Solution 3.5 Gal
  • Recovery Tank 2.5 Gal
  • Cleaning Path 4' clear sight upholstery tool
  • Vac Motor (UL Listed) 2-stage
  • CFM 104
  • Waterlift 89"
  • P.S.I. 55
  • Pump oscillating pump
  • Large 3.5 gallon solution and recovery tanks for extended cleaning between refills
  • Expandable solution and vacuum hose stretches from 2.5' to 10'

Best uses

  • Coffee, food and pet stains
  • Hallways and entrances
  • Upholstery, stairs and car interiors
  • Quick clean-ups between deep cleans

Troubleshooting

A ring or watermark is left around the spot

Checks to try, in order

  1. Too much solution was used — rinse the area with plain water.
  2. Make several dry vacuum passes, feathering out past the edge of the spot.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Little or no suction

Checks to try, in order

  1. Empty the recovery tank.
  2. Check the hose connection and tool for blockages.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Tool won't switch onShared · Electric (corded)

Likely causes

  • Tripped GFCI or breaker
  • Lock-off button
  • Damaged cord
  • Dead outlet

Checks to try, in order

  1. Check the outlet works and reset any GFCI / RCD that has tripped.
  2. Release the lock-off button or safety switch before squeezing the trigger.
  3. Inspect the cord and extension lead for cuts, crushed sections or damaged plugs.
  4. If running from a generator, make sure it's running and its breaker hasn't tripped.

A damaged cord or plug means the tool is out of service. Tag it and return it — never tape a cord.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Keeps tripping the breakerShared · Electric (corded)

Likely causes

  • Circuit overloaded
  • Undersized extension cord
  • Blunt accessory

Checks to try, in order

  1. Plug into a circuit with nothing else heavy running on it.
  2. Use a shorter, heavier extension cord. Long, thin cords starve the motor and trip breakers.
  3. Don't force the tool — a dull bit, blade or disc makes the motor draw more current.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Overheating, burning smell or heavy sparkingShared · Electric (corded)

Checks to try, in order

  1. Stop and unplug the tool.
  2. Check the motor vents aren't blocked with dust.
  3. Let it cool, fit a sharp accessory and let the tool's weight do the work.

Heavy sparking from the vents or a burning smell that returns points to worn brushes or a failing motor — workshop only.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?

Safety

For electric (corded)

  • Inspect the cord and plug before every use. Use a GFCI/RCD outdoors or near water.
  • Unplug before changing blades, bits, discs or pads.
  • Wear eye protection, and a dust mask when cutting, grinding or sanding masonry.

Videos & links

Related equipment

All Floor Care →

Always follow the manufacturer’s manual and site safety rules. Favourites and viewing history are stored on this device.