18 · Saws

Cut-Off Saw

Also called Power cutter · Concrete saw · Quick-cut saw · Chop saw · Demo saw

A handheld saw with a large abrasive or diamond wheel for cutting concrete, block, pavers, pipe and steel.

Battery / electric

Overview

A cut-off saw — also called a power cutter or concrete saw — is a handheld saw that spins a large abrasive or diamond wheel. It cuts concrete, block, pavers, stone, pipe and steel.

The unit pictured is a cordless (battery) power cutter, so there are no fumes or fuel to deal with.

It's the go-to tool for quick straight cuts in hard materials on site, from kerbs and pavers to ductile pipe.

Catalogue specifications

  • 4 STROKE - DO NOT USE MIXED FUEL - JUST STRAIGHT GAS

Best uses

  • Cutting pavers, block and kerbs
  • Cutting concrete and stone
  • Cutting ductile and steel pipe (with the right wheel)
  • Cutting rebar and steel sections

Troubleshooting

Diamond blade cuts slowly or glazes

Checks to try, in order

  1. Open up the diamonds by making a few cuts in soft, abrasive material such as a cinder block.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Saw stops mid-cut

Checks to try, in order

  1. The battery's overload or temperature protection has kicked in. Ease off the pressure and let it cool.
  2. Swap in a charged battery.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Blade wobbles

Checks to try, in order

  1. Remove the battery, then re-seat the blade on the correct arbor bushing and tighten the flange.

A bent or cracked blade must be replaced.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
No power or cuts out quicklyShared · Battery / electric

Likely causes

  • Battery not charged
  • Emergency stop pressed
  • Disconnect switch off

Checks to try, in order

  1. Charge fully before use and check the charge indicator.
  2. Check any battery disconnect or emergency stop switch.
  3. Make sure the charger was plugged into a live outlet overnight.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?

Safety

  • Never cut with the upper front quarter of the blade — that's the kickback zone.
  • Stand to the side of the cutting line, never directly behind the blade.
  • Wear a respirator, eye and face protection, and hearing protection.

For battery / electric

  • Charge in a ventilated area away from flammable materials.
  • Keep emergency stops unobstructed and test them before use.

Videos & links

  • YouTube video
  • YouTube video
  • How to use a Cut-Off Saw ↗Find this video on YouTube

Related equipment

All Saws →

Always follow the manufacturer’s manual and site safety rules. Favourites and viewing history are stored on this device.