13 · Floor Care

Upright Carpet Vacuum

Also called Upright vacuum · Commercial vacuum · Carpet vacuum

A commercial upright vacuum with a beater bar, for dry carpet cleaning before or after extraction.

Electric (corded)
View in the rental catalogue ↗Compare →

Overview

An upright vacuum with a rotating brush lifts dry soil out of carpet pile, which a suction-only machine leaves behind.

It is the machine used before carpet extraction: taking the dry soil out first means the extractor is not turning dust into mud.

It also handles routine cleaning in offices, villas and rental turnovers where no wet cleaning is needed.

For wet pick-up use the wet/dry vacuum, and for deep cleaning use the carpet extractor.

Catalogue specifications

  • CARPET VACUUM
  • SPECIFICATIONS
  • Dimensions 18"W x 48"H
  • Power supply (Ph/V/Hz) 1 / 120 / 60
  • Working width 18
  • Length of cord access. (ft) 40
  • Operating noise level (dB(A)) 67
  • Waterlift 90
  • Air flow 117
  • Rated input power (W) 1000
  • Filter bag capacity (gal) 1.3
  • Ship Weight (with accessories) (lbs) 21
  • Theoretical working capacity 4000

Best uses

  • Dry carpet cleaning before extraction
  • Routine office and villa cleaning
  • Rental turnovers

Not suited for

  • Wet pick-up — use the wet/dry vacuum
  • Hard floors with loose grit, which the brush will throw

Troubleshooting

Poor pick-up

Checks to try, in order

  1. Check and empty the bag or bin — pick-up falls off well before it is full.
  2. Check the filters. A clogged filter stops airflow even with an empty bag.
  3. Check the hose and inlet for a blockage.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
The brush roll does not turn

Checks to try, in order

  1. Unplug it, then clear string and hair wound around the roll.
  2. Check the drive belt for stretching or breakage.
  3. Check the height setting — set too high, the brush never touches the carpet.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Tool won't switch onShared · Electric (corded)

Likely causes

  • Tripped GFCI or breaker
  • Lock-off button
  • Damaged cord
  • Dead outlet

Checks to try, in order

  1. Check the outlet works and reset any GFCI / RCD that has tripped.
  2. Release the lock-off button or safety switch before squeezing the trigger.
  3. Inspect the cord and extension lead for cuts, crushed sections or damaged plugs.
  4. If running from a generator, make sure it's running and its breaker hasn't tripped.

A damaged cord or plug means the tool is out of service. Tag it and return it — never tape a cord.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Keeps tripping the breakerShared · Electric (corded)

Likely causes

  • Circuit overloaded
  • Undersized extension cord
  • Blunt accessory

Checks to try, in order

  1. Plug into a circuit with nothing else heavy running on it.
  2. Use a shorter, heavier extension cord. Long, thin cords starve the motor and trip breakers.
  3. Don't force the tool — a dull bit, blade or disc makes the motor draw more current.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Overheating, burning smell or heavy sparkingShared · Electric (corded)

Checks to try, in order

  1. Stop and unplug the tool.
  2. Check the motor vents aren't blocked with dust.
  3. Let it cool, fit a sharp accessory and let the tool's weight do the work.

Heavy sparking from the vents or a burning smell that returns points to worn brushes or a failing motor — workshop only.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?

Safety

  • Unplug before clearing the brush roll.
  • Keep the cord behind you and out of the brush path.

For electric (corded)

  • Inspect the cord and plug before every use. Use a GFCI/RCD outdoors or near water.
  • Unplug before changing blades, bits, discs or pads.
  • Wear eye protection, and a dust mask when cutting, grinding or sanding masonry.

Videos & links

Related equipment

All Floor Care →

Always follow the manufacturer’s manual and site safety rules. Favourites and viewing history are stored on this device.