09 · Heavy Equipment

Boom Lift

Also called Cherry picker · Articulating boom · Aerial work platform

A bucket on a hydraulic arm that reaches up, out and over obstacles for work at height.

Engine or electric (varies by unit)

Sizes & models we rent

Show all models

38 ft electricIndoor and slab work, no fumes 46 ft electricIndoor and slab work, no fumes

Selected model

Boom Lift · 38 ft electric

Indoor and slab work, no fumes

Goes with this model

HARNESS, SAFTEY

View the 38 ft electric in the catalogue ↗Compare →

Overview

A boom lift (also called a manlift) is an aerial lift that raises workers on construction sites, along utility lines and elsewhere. It has a platform or bucket on a hydraulic arm, mounted on a movable base.

Operators use boom lifts to extend their vertical or horizontal reach, or to work at angles in difficult workspaces.

Scissor lifts and boom lifts both give access to elevated work, but they move differently and serve different purposes. Boom lifts raise workers in a small bucket or compact platform, and unlike scissor lifts they move both horizontally and vertically.

A scissor lift may be the better choice for lifting containers to high warehouse shelves, washing windows on the side of a building, lifting workers on rough-terrain sites, or raising multiple workers and bulkier material.

Catalogue specifications · 38 ft electric

Max. working height 43' 7" 13.5m
Max. platform height 37' 7" 11.5m
Max. horizontal reach 20' 6.1m
Clearance height at max. outreach 17' 9" 5.4m
Platform size (inside) 27.1" x 43.7" 0.69m x 1.11m
Overall width 4' 11" 1.5m
Overall length 13' 4.8" 4.1m
Stowed height 6' 8" 2.0m
Ground clearance 4.7" 120mm
Platform capacity 475 lbs 215kg
Max. drive height 37' 7" 11.5m
Max. wind speed 28 mph 0.64km/h
Max. drive speed (stowed) 2.5 mph 4.0km/h
Max. drive speed (elevated) 0.4 mph 0.64km/h
Platform rotation 90°
Superstructure rotation 360° non continuous
Tailswing (riser boom elevated) 0" 0m
Tailswing (riser boom stowed) 55" 1.4m
Raise / lower time 83 /68 sec
Gradeability 36%
Inside turning radius 3' 8" 1.12m
Outside turning radius 7' 10" 2.4m

Best uses

Scaffolding work
Painting
Piping work
Maintenance projects
Exterior cleaning
Utility work
Reaching up and over obstacles

Not suited for

Lifting several workers with bulky materials — a scissor lift has more platform space

Troubleshooting

Find a symptom

Boom won't move from the platform

Checks to try, in order

Press and hold the foot switch (enable pedal) while using the controls.
Pull out the emergency stops at the ground and platform controls.
Set the base key switch to PLATFORM.
Check for tilt or overload alarms.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?

Won't drive with the boom up

Checks to try, in order

Many boom lifts disable or slow driving outside the stowed position — that's normal.
Lower and stow the boom before driving any distance.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?

Safety

Wear a full-body harness with the lanyard clipped to the platform anchor point.
Stay well clear of overhead power lines — at least 10 ft, more for higher voltages.
Don't operate in winds above the manufacturer's rating.