A tiller turns compacted ground into a loose, workable bed using rotating blades called tines.
It is used to prepare ground for planting or turf, to work compost and fertiliser through the soil, and to break up ground that has been walked on or parked on.
Soil condition matters. Slightly moist soil tills beautifully; bone dry soil turns to dust and sodden soil packs into clods.
Work in passes at increasing depth rather than trying to reach full depth in one go.
Catalogue specifications
What this will run
Typical figures for this class of machine. Check the data plate before promising a customer.
Best uses
Preparing vegetable beds and planting areas
Breaking up compacted soil before turf
Working compost or fertiliser into the ground
Not suited for
Stony or root-filled ground
Sodden soil, which packs rather than breaks up
Working over buried irrigation lines
Troubleshooting
It hops across the surface instead of digging in
Checks to try, in order
Ground is too hard or too dry — soak it and come back.
Lower the depth bar so the machine has something to drag against.
Check the tines are fitted the right way round; reversed tines will not pull in.
Reference draft — always follow the manufacturer’s manual.
Turn the fuel valve ON and the engine switch to ON.
Cold engine: close the choke. Warm engine: leave the choke open.
Check there is fresh petrol in the tank — stale or water-contaminated fuel is the most common cause.
Check the engine oil. Many engines have a low-oil shutdown that stops them starting when oil is low or the machine is on a slope — top up and set the machine on level ground.
Make sure the spark plug cap is pushed fully onto the plug.
Pull the starter rope with a smooth, firm pull — don't let it snap back.
If the starter rope is locked or unusually hard to pull, stop — don't force it. Tag the unit and return it to the workshop.
Reference draft — always follow the manufacturer’s manual.
Always follow the manufacturer’s manual and site safety rules. Favourites and viewing history are stored on this device.
FRAUD ALERT
We are aware of an individual claiming to be the CEO of Hilton Machineries & Sales Company and falsely representing that they are purchasing equipment through Massive Equipment & Sales Ltd.
Massive Equipment has no affiliation with this company or individual. Do not send funds, deposits or financial information in connection with these communications.
To verify any request, contact us directly at 345-949-7990 or info@massivegroup.com.