05 · Pressure Washers

Pressure Washer Attachments

Also called Surface cleaner · Rotary surface cleaner · Extension wand · Nozzle tips

Rotary surface cleaners for fast, streak-free flatwork and extension wands for reaching tall buildings.

Manual / non-powered

Sizes & models we rent

Show all models
Rotary surface cleanerWand with nozzle tips

Selected model

Pressure Washer Attachments · Rotary surface cleaner

View the Rotary surface cleaner in the catalogue ↗Compare →

Overview

These are the attachments that change what a pressure washer can do. They are hired alongside one, not instead of it.

The rotary surface cleaner is a shrouded housing with a spray bar spinning underneath. Because it holds the nozzles at a fixed height and sweeps them in a circle, it cleans flatwork evenly instead of leaving the stripes a hand-held wand always does — sidewalks, driveways, garage floors, parking lots, warehouses, pool decks and outdoor courts.

The extension wand puts the nozzle up at second-storey siding without a ladder. Nozzle tips come as a set: 0°, 15°, 25°, 40° and soap.

Move the surface cleaner slowly and overlap each pass by about a third, or it will stripe anyway.

Best uses

  • Sidewalks, driveways and garage floors
  • Parking lots, warehouses and pool decks
  • Outdoor courts and decks
  • Second-storey siding (extension wand)

Troubleshooting

Surface cleaner leaves stripes or swirl marks

Checks to try, in order

  1. Slow down and overlap your passes.
  2. Clean the spray bar nozzles — one blocked nozzle leaves a stripe.
  3. Check the washer's pressure is high enough for the cleaner.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Spray bar won't spin

Checks to try, in order

  1. Check for a clogged nozzle.
  2. Make sure the gun and washer are at full pressure.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?
Wand or cleaner won't click on

Checks to try, in order

  1. Pull the quick-connect collar fully back, push the fitting in, then release the collar.

Reference draft — always follow the manufacturer’s manual.

Link to this fixDid this solve the problem?

Safety

For manual / non-powered

  • Inspect for damage before every use and never exceed the rated load.

Videos & links

Related equipment

All Pressure Washers →

Always follow the manufacturer’s manual and site safety rules. Favourites and viewing history are stored on this device.